====== FC880 ======

Doc van Philips http://download.p4c.philips.com/files/7/70fc880/70fc880_dpi_eng.html

Gebruiksaanwijzing: [[http://wj-it.synology.me/web_doc/Philips_doc/Usermanuals/Philips_FC880_Manual.pdf|FC880]]

<file txt FC880.txt>
FAQ -


GENERAL INFORMATION
. Double autoreverse Solenoid Electronic Cassette Deck with
  Dolby HX PRO
. Two digitally-controlled Solenoid-electronic quick-autoreverse
  cassette mechanisms
. Separate tape feed and wind motors
. Continuous recording or playback with both decks
. Two simultaneous recordings from one source
. CD synchro recording
. Multifunction display featuring twin operating mode/digital peak
  level, 4-digit tape counter and 2x 12-element peak hold record
  level indicators
. Dolby HX Pro headroom extension system
. Dolby B/C noise reduction and additionally switchable MPX filter
. QMS, AMS (Index Scan), Record Mute, Blank Skip, Quick Rewind Stop,
  Counter Memory Stop
. Normal or High-speed dubbing
. Random memory play or dubbing
. Timer mode for record or playback using external timer

AUDIO TAPE DECK
Track separation      : 65 dB
Wow and Flutter       : 0.15% (DIN); 0.07% (WRMS)
Cassette system       : Compact cassette
Channel separation    : 45 dB (at 1000 Hz)
Distortion            : < 2%   at max level
                        < 1.2% at nom level
FM pilot suppression  : 30 dB
Heads                 : . super hard Metal Alloy
                          recording playback heads
                        . Ferrite double gap erase heads
Improvement S/N ratio : with Dolby B NR at 5 kHz: 10 dB
                        with Dolby C NR at 1 kHz: 20 dB
Motor type            : DC/DC servo, 2x
Speed tolerance       : 1.5% (max. speed variation)
Tape transport        : Twin Solenoid electronic autoreverse
Tape travel speed     : 4.76 cm/sec.

Frequency response acc. to:
             IEC            NAB
metal tape   30-17,000 Hz   30-18,000 Hz
chrome tape  30-17,000 Hz   30-18,000 Hz
normal tape  30-16,000 Hz   30-17,000 Hz

S/N ratio (without Dolby NR) acc. to:
             IEC            NAB
metal tape   58 dB          60 dB
chrome tape  58 dB          60 dB
normal tape  57 dB          59 dB

. Multifunctional display
. 2-Way sequential or simultaneous recording
. AMS Automatic Music Scan (index scan)
. Record Mute
. Blank skip
. QMS Quick Music Search
. CD Synchro recording
. Precision electronic tape transports
. Dolby HX-Pro headroom extension system
. Separate record level and balance controls to ensure precision
  recordings
. Choice of Dolby C or Dolby B noise reduction caters for both new
  recordings and existing cassettes
. Switchable MPX filter cuts out pilot-tone interference on recordings
  from FM radio
. CPU logic control of virtually all switching and display functions
. Counter memory stores any point on the tape for fast return
. Time switch sets up the deck for record or playback under external
  timer control
. Auto tape selection to set up correct bias and equalization levels
  for normal, chrome and metal tapes.
. High-grade normal or high-speed dubbing.
. Cue and Review
. Full autostop to protect tapes and transport mechanisms in all
  operating modes

CONNECTIONS
Headphone            : Impedance 8-600 �
Line in, cinch type  : 70 mV at 47 k�
Line out, cinch type : 0.5 V (Zo = 2.2 k�)
Remote control       : system RC-5

. Front-panel headphone
. Connections for RC-5 system remote control and remote receiver unit
  EM2200

MISCELLANEOUS
Weight                  : 5 kg
Connection cable        : provided
Dimensions (wxhxd)      : 420x118/136x280 mm
Electrical requirements : IEC
Mains frequencies       : 50 and 60 Hz, without conversion
Mains voltages          : 220 V AC, with service solution for
                          240 V
Material/finish         : metal; brushed front panel
Power consumption       : 28 W



Monday, July 10, 19100 

</file>